323-952-4630 Showroom, 818 642-2171 Cell
John Blue Audio Art
 
Loudspeakers Designed and Built-in Denmark!
I have the Phi Series Available for demonstration in my showroom in Los Angeles.
GamuT Phi Series Wood Veneer and Paint Options:
Sycamore Bubinga   Santos Zebrano   Flat White Laquer      
                     
 
Phi 3 Bookshelf Loudspeaker
         
 

       Our Phi3 is developed for the true audiophile who above all cares about music reproduction. In its tiny exquisite architectural packaging the Phi3 delivers resolution and dynamics belying its small size. As a pure 2-channel loudspeaker the Phi3 is best suited for rooms up to 30 m².

For larger rooms or deeper reproduction of the lowest octaves we recommend combining it with a dynamic accurate sub woofer for the best match of speed and dynamic capability.

The Phi3 will be your perfect partner for a multi channel surround setup using four or six pcs in combination with the Phi-LCR as centre channel.

  • The Bi wire input terminal with the GamuT designed massive pure copper connections.

  • Select Wood Veneers.

Specs:
System 2 Way
Bass/midrange 1 x 150 mm (5.5")
Driver Units: * Wood fiber cone, Low loss suspension, Low distortion dynamic linear magnet system, Spike mounted free flow chassis, Machined centre wave guide.
Tweeter 25 mm (1") Dual Concentric Ring Radiator
Frequency response +/- 3dB 58-40.000 Hz
Impedance 4 Ohms
Sensitivity 86 dB
Size (WxHxD) 170 x 330 x 240
Weight 15.4 lbs/7 kg
Call for Pricing
 
Phi LcR
 
   
 
    The Phi-LCR was developed to be used in a 5 or 7 channel surround setup. Featuring two of the GamuT 5.5” mid woofers the Phi-LCR is also en excellent 2-channel transducer. So if you need the extra sound pressure level (SPL) compared to the Phi3, check out the Phi-LCR.

The PhI-LCR is developed to match any of the Phi series speakers as a centre channel speaker, as a combined front and centre channel speaker, or as the only speaker in a full surround setup.

Specs:
System 2 Way
Bass/midrange 2 x 150 mm (5.5")
Driver Units: * Wood fiber cone, Low loss suspension, Low distortion dynamic linear magnet system, Spike mounted free flow chassis, Machined centre wave guide.
Tweeter 25 mm (1") Dual Concentric Ring Radiator
Frequency response +/- 3dB 65-40.000 Hz
Impedance 4 Ohms
Sensitivity 88 dB
Size (WxHxD mm) 6.69" (170) x 13" (330) x 9.5" (240)
Weight 21.3 lbs (9.7 kg)
Call for Pricing Wood Veneer, White or Black Flat Lacquer
Phi 3 Metal speaker Stands
     
$499.00 sold  in Pairs. Available in Metallic Black  or Metallic Silver
 
Phi 5 Floor Standing 3 Way Loudspeaker
               
 
     The Phi5 is the smallest of our floor-standing speaker in our new Phi series. The beautiful Phi5 was developed by using all of the proprietary technology found in our L-series and its state of the art technical design delivers all the 3D imaging, resolution, detailing, dynamics and transparency you would expect from any GamuT product. The Phi5 introduces our new Auto Aligning Feet that features a twistable knob to eliminate resonances in the coupling between the speaker and the floor. With its three proprietary GamuT designed 5,5' woofers and a newly optimized dual ring radiator tweeter, the performance of the Phi5 sets new standards for speakers in its size and price range.

Prepare to be amazed by the Gamut Phi5. Use the Phi5 as the main speaker in a 2-channel setup, or in an exclusive surround setup in combination with the Phi3 and Phi-LCR.
  • The Bi wire input terminal with the GamuT designed massive pure copper connections.
  • Select Wood Veneers

Reviews:

6 Moons Jörg Dames June 2009, reprinted from German

"certain traits like exceptionally involving, lively and rhythmic did quickly stand out and promptly got confirmed a few weeks later within my own four walls."   http://www.6moons.com/audioreviews/gamut/gamut.html

"Violins never become scalpels, voices don't go Twiggy and Western guitars exude plenty of proper woodiness and not just metalized blister. The midrange here is thus righteously color true but does adds an extra dose of liveliness. There's clearly no restraint going upwards which explains the Phi5's general affinity for jagged impulses, brio and directness rather than an outright silky flow or a laid-back posture."
Specs:
System 3 Way
Bass/midrange 2 x 150 mm (5.5")
Driver Units * Wood fiber cone, Low loss suspension, Low distortion dynamic linear magnet system, Spike mounted free flow chassis, Machined centre wave guide.
Tweeter 25 mm (1") Dual Concentric Ring Radiator
Frequency response +/- 3dB 42-40.000 Hz
Impedance 4 Ohms
Sensitivity 88 dB
Size (WxHxD) 6.7" x 39.37" x 12.59"
Weight 19 kg/42 lbs.
Call for Pricing Wood Veneer, White or Black Flat Lacquer
 
Phi 7
 
     
 
       
 
      The Phi 7 is our highest performance speaker in the PHi series. Using all the knowledge gained during the development of the GamuT L-series, the Phi7 will amaze you with its dynamic contrast and resolution, its unparalleled 3D imaging, impact and bass extension. The mid range works in perfect unison with the 4 woofers due to our proprietary DC Coupled Midrange technology and our Acoustic Coupled Driver technology to bring your audio experience to new levels.

The tall baffle with the woofers distributed over its height gives an excellent acoustic coupling to the listening room and assures maximum control over resonances generated in the listening room itself. Treat yourself to experience audio excellence provided by the Phi7. The Phi7 will boost you expectations of the performance level possible to achieve from speakers designed with a true architectural approach in mind.

We recommend using the Phi7 as your main speaker in a 2-channel setup, or as part of a surround system experience in combination with any of the speakers in the Phi series.

Features:
  • The Bi wire input terminal with the GamuT designed massive pure copper connections.
  • Select Wood Veneers.
Specs:
System 3 Way
Bass/midrange 4 x 150 mm (5.5")
Driver Units * Wood fiber cone, Low loss suspension, Low distortion dynamic linear magnet system, Spike mounted free flow chassis, Machined centre wave guide.
Tweeter 25 mm (1") Dual Concentric Ring Radiator
Frequency response +/- 3dB 40-40.000 Hz
Impedance 4 Ohms
Sensitivity 90.5 dB
Size (WxHxD) 6.7" x 47.24" x 10.63"
Weight 50 lbs/22.7 Kg
*Specially made for the GamuT Phi-Series by Lars Goller
Call for Pricing Wood Veneer, White or Black Flat Lacquer
 
The WormHole Speaker cables
         
-Optimizing cable performance-
 
-Why are cables influencing the transfer of current from the amplifier to the speaker?
  1. Materials are of the essence for the conductor to let the current flow without influence
  2. The conductor needs to be isolated, so a special solution is developed to eliminate the influence from the insulation material
  3. The load effects from the cable must optimized to eliminate resonances being created
The WormHole design solution:
  • Conductive cores made from silver coated ultimate purity cast Copper
  • Primary Isolation made of Teflon PTFE to  minimize stored energy and electric absorption.
  • A unique and proprietary fabric is covering the PTFE isolation and terminating stored energy.
  • A unique and proprietary external fabric cover is optimizing the termination of stored energy
The WormHole Benefits: 
  • Highest levels of Transparency
  • Enhanced 3-dimensionality
  • Lowered intertransient noise levels
  • True to life timbre from voices and instruments
  • Real harmonic structure from all sound sources
  • Optimum resolution of details
  • Enhanced Dynamics
WormHole Speaker Cable 3 Meter Pair $5,850., 4 Meter Pair $6,875.               
 
Only with this Gamut interconnect cable you can be sure of making the right connection.
 
 
Available in XLR balanced version or RCA unbalanced.
It's built within the high levels of professional standards, constructed with a solid copper core with a thin silvercoat around it, wrapped in proctive tefloncoat and equipped with the advanced Neutrik connectors. 
WormHole Signal Cable (Interconnect) XLR or RCA      1 Meter Pair $850.,  2Meter Pair $892.  each additional Meter $42.00
 
 
El Superiores Acoustic Transducers 
El Superiores - S3
     
   
Enclosure Construction:
      Form pressed Solid wood over multi layered Finnish Beech plywood.  This construction in itself has a subjective more pleasing harmonic structure than solid wood alone or solid MDF.   Form pressing minimizes the need for panel damping by leaving an inherent force in the structure that in itself causes faster decay of non wanted vibration.

The internal fan shaped reinforcement structure in combination with the externally machined Canals in the solid wood, divides the side walls in separate segments with less vibration differentiated to multiple frequencies, resulting in a minimum of coloration.
Internal acoustics: The internal pressure is guided and controlled by the fan shaped reinforcement structure, and a full height vertical reinforcement structure. These critically positioned structures time aligns the coupling to the port openings and holds the internal acoustic dampening material to achieve an optimum of dynamic linearity simultaneously with a well damped acoustic environment.
Port openings: 5mm thick Solid machined Aluminum, threaded directly into the Plywood/solid wood, minimizes the resonances of the port itself, increases accuracy of the tuning and minimizes port turbulence & noise.
The connection terminals:
Solid stainless steel over brass and Gold plated OFC copper. The Terminals are designed to minimize contact resistance by optimizing the surface contact area by using striped wire. The terminals also accept Banana plugs, or custom spades.
The front cover: is designed to have no audible influence on the performance. We use solid stainless steel side rods, and high quality fabric woven rubber strings to protect the drivers.
The Spikes system: is designed to be non resonant by having a rubber pad adding force into the spike itself, thereby eliminating resonance of the combined structure. Hard Floor protective coupling devices are supplied with the speakers, assuring best possible protection of delicate floors.
The spike systems is made of solid stainless steel.
The Column: is made as the enclosure of solid wood over finish beech plywood. T column itself has a solid plywood interior, with a machined groove for cables on the backside. The floor coupling plate is designed to divide the pressure on the 4 spikes for minimum resonance.
Drivers are specially optimized for the El Superiores. The Mid/woofer for the S3 is optimized for maximum impulse behavior and the cone is treated with a specially developed hand treatment of the cone structure that minimizes coloration and optimizes the natural reproduction of voices and instruments.

The NRLI network. Our Non resonant Linked Impulse solution:
  • NRLI is designed to operate in the time-domain and perform resonance control.
  • NRLI aligning the drive-units impulse wise
  • NRLI is optimizing the resonant behavior of the individual drivers and the network itself
DC coupled midrange: DCCM
  • The DCCM purpose is to eliminate the phase shift between the midrange and woofers seen in conventional network designs.
  • The DC coupling means that the midrange driver is directly connected to the amplifier, not using a capacitor to filter the low frequencies.
  • The DCCM filtering (attenuation) of low frequencies is done by using a combination of series and parallel layout of the network, thereby achieving the attenuation of the lower frequencies without adding phase shift to the midrange signals.
The GamuT “WormHoles” cables, A new GamuT development.
  • The “WormHoles” optimizes the impulse behaviour and controls the resonant character of the Cable load
  • The “WormHoles” design minimizes the influence by the electric insulation
  • The design consists of individual insulated conductors, with a special surrounding woven material.
  • The “WormHoles” design weaves two individual wires into one single pair of wires.
  • The “WormHoles” are directional, which means that even internally in the speaker one end is connected to the terminals, the other end to the drivers
  • The “WormHoles” proprietary design minimizes stored energy in the cable, and diversifies it away from the signal path
  • The Benefit: Transparency, Clarity & Freedom of coloration and resonance.
  • “More music less noise”
Specs:
Enclosure type: Impulse optimized Bass Reflex.
Enclosure build: Laminated and Form pressed Solid wood over multilayered Beech plywood.
Enclosure construction: Internal Bracing and pressure control segments and externally machined groves for optimized cabinet surfaces behavior.
Ground coupling: Solid MDF and rubber feet.
Internal Enclosure Acoustics: critically positioned & optimized acoustic elements.
Driver separation: By acoustic elements only
Port openings: 2 x 5 mm solid aluminum, optimized flow, anti resonance coupled to the enclosure.
Input Terminals: GamuT machined Stainless steel, Brass and Gold plated Copper terminals.
Connection Options: Minimum loss bare wire connection, 20 mm spades or 4 mm Banana, Separate connection for the tweeter and for the mid / woofer section
Internal Wiring: GamuT “ Worm Holes“ wires.
Woofer/mid: 7" sliced cone, dynamic optimized, GamuT Hand treated cone structure.
Tweeter: 1.5" impulse and resonance optimized Double ring radiator, with GamuT stainless steel wave guide.
Network: Impulse correct and resonance optimized NRLI.
Front Cover: Acoustically invisible stainless steel rods & fabric coated rubber strings, all screw assembled and adjusted by hand.
Impedance: 5 ohms nominal
Minimum impedance: 4.0 ohms at 220 Hz
Crossover point: 2150 Hz
Sensitivity: 87.5dB/2.83V
Frequency response: 38Hz - 60 kHz
Dimensions: 15.75" (H) 8.9" (W) 17.95" (D)
Weight: 24 Kg/52.8 lbs
Recommended amplifier for maximum performance: minimum 100W into 4 ohms.
Recommended amplifier for maximum performance: maximum 400W into 4 ohms.
El Superiores S3 Column:
Construction: Laminated and Form pressed Solid wood over multilayered Birch plywood. Cables groove on the back side of the Column Mounting to the S3: Bolt on
Height: 615mm
Weight: 22 Kg/48.5 lbs
Dimensions: 25.95" (H) 10.63" (W) 18.23" (D)
Floor  coupling: Solid Integrated stainless steel spike system, resonance controlled.

Call for Pricing Ash white,  Sipo Mahogany,  Weinge

 
El Superiores - S5
     
El Superiores S5

Enclosure Construction:
      Form pressed Solid wood over multi layered Finnish Beech plywood.  This construction in itself has a subjective more pleasing harmonic structure than solid wood alone or solid MDF.   Form pressing minimizes the need for panel damping by leaving an inherent force in the structure that in itself causes faster decay of non wanted vibration.

The internal fan shaped reinforcement structure in combination with the externally machined Canals in the solid wood, divides the side walls in separate segments with less vibration differentiated to multiple frequencies, resulting in a minimum of coloration.
Internal acoustics: The internal pressure is guided and controlled by the fan shaped reinforcement structure, and a full height vertical reinforcement structure. These critically positioned structures time aligns the coupling to the port openings and holds the internal acoustic dampening material to achieve an optimum of dynamic linearity simultaneously with a well damped acoustic environment.
Port openings: 5mm thick Solid machined Aluminum, threaded directly into the Plywood/solid wood, minimizes the resonances of the port itself, increases accuracy of the tuning and minimizes port turbulence & noise.
The connection terminals:
Solid stainless steel over brass and Gold plated OFC copper. The Terminals are designed to minimize contact resistance by optimizing the surface contact area by using striped wire. The terminals also accept Banana plugs, or custom spades.
The front cover: is designed to have no audible influence on the performance. We use solid stainless steel side rods, and high quality fabric woven rubber strings to protect the drivers.
The floor coupling devices & Spikes are designed to be non resonant by having a rubber pad adding force into the spike itself, thereby eliminating resonance of the combined structure. Hard Floor protective coupling devices are supplied with the speakers, assuring best possible protection of delicate floors. The spike systems are made of solid stainless steel.
Drivers are specially optimized for the El Superiores. Drivers a
re specially optimized for the El Superiores. The Midrange & woofer for the S5 are optimized for maximum impulse behavior and the cones are hand treated. Both are receiving a specially developed hand applied treatment of the cone structure that minimizes coloration and optimizes the natural reproduction of voices and instruments.

The NRLI network. Our Non resonant Linked Impulse solution:
  • NRLI is designed to operate in the time-domain and perform resonance control.
  • NRLI aligning the drive-units impulse wise
  • NRLI is optimizing the resonant behavior of the individual drivers and the network itself
DC coupled midrange: DCCM
  • The DCCM purpose is to eliminate the phase shift between the midrange and woofers seen in conventional network designs.
  • The DC coupling means that the midrange driver is directly connected to the amplifier, not using a capacitor to filter the low frequencies.
  • The DCCM filtering (attenuation) of low frequencies is done by using a combination of series and parallel layout of the network, thereby achieving the attenuation of the lower frequencies without adding phase shift to the midrange signals.
The GamuT “WormHoles” cables, A new GamuT development.
  • The “WormHoles” optimizes the impulse behavior and controls the resonant character of the Cable load
  • The “WormHoles” design minimizes the influence by the electric insulation
  • The design consists of individual insulated conductors, with a special surrounding woven material.
  • The “WormHoles” design weaves two individual wires into one single pair of wires.
  • The “WormHoles” are directional, which means that even internally in the speaker one end is connected to the terminals, the other end to the drivers
  • The “WormHoles” proprietary design minimizes stored energy in the cable, and diversifies it away from the signal path
  • The Benefit: Transparency, Clarity & Freedom of coloration and resonance.
  • “More music less noise”
Specs:
Enclosure type: Impulse optimized Bass Reflex.
Enclosure build: Laminated and Form pressed Solid wood over multilayered Beech plywood.
Enclosure construction: Internal Bracing and pressure control segments and externally machined groves for optimized cabinet surfaces behavior.
Floor  coupling: Solid Integrated stainless steel spike system, resonance controlled.
Internal Enclosure Acoustics: critically positioned & optimized acoustic elements.
Driver separation: By acoustic elements only
Port openings: 2 x 5 mm solid aluminum, optimized flow, anti resonance coupled to the enclosure.
Input Terminals: GamuT machined Stainless steel, Brass and Gold plated Copper terminals.
Connection Options: Minimum loss bare wire connection, 20 mm spades or 4 mm Banana, Separate connection for the tweeter and for the mid / woofer section
Internal Wiring: GamuT “ Worm Holes“ wires.
Woofer/mid: 2 x 7" sliced cone, dynamic optimized, GamuT Hand treated cone structure.
Tweeter: 1.5" impulse and resonance optimized Double ring radiator, with GamuT stainless steel wave guide.
Network: Impulse correct and resonance optimized NRLI.
Front Cover: Acoustically invisible stainless steel rods & fabric coated rubber strings, all screw assembled and adjusted by hand.
Impedance: 4 ohms nominal
Minimum impedance: 3.0 ohms at 210 Hz
Crossover point: 550 & 2250 Hz
Sensitivity: 89.5dB/2.83V
Frequency response: 31Hz - 60 kHz
Dimensions: 47.64" (H) 8.9" (W) 22.64"(D)
Weight: 54 Kg/119 lbs.
Recommended amplifier for maximum performance: minimum 150W into 4 ohms.
Recommended amplifier for maximum performance: maximum 600W into 4 ohms.

Call for Pricing Ash Mahogany,  Sipo Mahogany,  Weinge

 
El Superiores - S7 - same construction as S5 with one additional Driver
 
         
 
Specs:
Enclosure type: Impulse optimized Bass Reflex.
Enclosure build: Lamiminated and Form pressed Solid wood over multilayered Birch plywood.
Enclosure construction: Interrnal Bracing and pressure control segments and externally machined groves for optimized cabinet surfaces behavior.
Floor coupling: Solid Integrated stainless steel spike system, resonance controlled.
Internal Enclosure Acoustics: critically positioned & optimized acoustic elements.
Driver separation: By acoustic elements only
Port openings: 2 x Machined solid Brass in a Solid stainless steel flange, optimized flow, anti resonance coupled to the enclosure.
Input Terminals: GamuT machined Stainless steel, Brass and Gold plated Copper terminals.
Connection Options: Minimum loss bare wire connection, 20 mm spades or 4 mm Banana, Separate connection for the tweeter and for the mid / woofer section
Internal Wiring: GamuT “ Worm Holes“ wires.
Woofer/mid: 1 x 7" sliced cone, dynamic optimized, GamuT Hand treated cone structure.
Tweeter: 1.5" impulse and resonance optimized Double ring radiator, with GamuT stainless steel wave guide.
Network: Impulse correct and resonance optimized NRLI.
Network configuration: 2 1/2 - way, baffle-corrected for free in room placement.
Front Cover: Acoustically invisible stainless steel rods & fabric coated rubber strings, all screw assembled and adjusted by hand.
Impedance: 4 ohms nominal
Minimum impedance: 2.9 ohms at 250 Hz
Crossover point: 250 & 2150
Sensitivity: 89.5dB/2.83V
Frequency response: 27Hz - 60 kHz
Dimensions: 50.49" (H) 8.9" (W) 25.27" (D)
Weight: 68 Kg/150 lbs.
Recommended amplifier for maximum performance: minimum 100W into 4 ohms.
Recommended amplifier for maximum performance: maximum 500W into 4 ohms.
Call for Pricing available in Ash White,   Sipo Mahogany,   Weinge
 
 
El Superiores S9 3 way 10" Drivers
       
 
 
Enclosure Construction:
      Form pressed Solid wood over multi layered Finnish Beech plywood.  This construction in itself has a subjective more pleasing harmonic structure than solid wood alone or solid MDF.   Form pressing minimizes the need for panel damping by leaving an inherent force in the structure that in itself causes faster decay of non wanted vibration.

The internal fan shaped reinforcement structure in combination with the externally machined Canals in the solid wood, divides the side walls in separate segments with less vibration differentiated to multiple frequencies, resulting in a minimum of coloration.
Internal acoustics: The internal pressure is guided and controlled by the fan shaped reinforcement structure, and a full height vertical reinforcement structure. These critically positioned structures time aligns the coupling to the port openings and holds the internal acoustic dampening material to achieve an optimum of dynamic linearity simultaneously with a well damped acoustic environment.
Port openings: Port openings are machined solid brass threaded into solid stainless steel held in solid wood. This design eliminates resonance by the port structure itself, increases the accuracy of the tuning and minimizes port turbulence and noise.
The connection terminals:
Solid stainless steel over brass and Gold plated OFC copper. The Terminals are designed to minimize contact resistance by optimizing the surface contact area by using striped wire. The terminals also accept Banana plugs, or custom spades.
The front cover: is designed to have no audible influence on the performance. We use solid stainless steel side rods, and high quality fabric woven rubber strings to protect the drivers.
The floor coupling devices are designed to be non resonant, by adding rubber dampening rings inserted into the stainless steel base plates (S9), or by having a rubber pad adding force into the spike itself, thereby eliminating resonance of the combined structure.  Hard Floor protective coupling devices are supplied with the speakers, assuring best possible protection of delicate floors.
The 85kg stainless steel base for the S9 is chosen to lower the point of gravity to optimize stability.
Other S series are designed with wider spike positioning resulting in same relative levels of stability, The spike systems are all solid stainless steel.
 
Drivers are specially optimized for the El Superiores.
Special fluent rubber damped solid wood inserts are used in the S8 and S9 bass drivers to optimize the acoustic behavior and dynamic accuracy of the bass system. Midrange drivers are receiving a specially developed hand applied treatment of the cone structure that minimizes coloration and optimizes the natural reproduction of voices and instruments.

The NRLI network. Our Non resonant Linked Impulse solution:
  • NRLI is designed to operate in the time-domain and perform resonance control.
  • NRLI aligning the drive-units impulse wise
  • NRLI is optimizing the resonant behavior of the individual drivers and the network itself
DC coupled midrange: DCCM
  • The DCCM purpose is to eliminate the phase shift between the midrange and woofers seen in conventional network designs.
  • The DC coupling means that the midrange driver is directly connected to the amplifier, not using a capacitor to filter the low frequencies.
  • The DCCM filtering (attenuation) of low frequencies is done by using a combination of series and parallel layout of the network, thereby achieving the attenuation of the lower frequencies without adding phase shift to the midrange signals.
 
The GamuT “WormHoles” cables, A new GamuT development.
  • The “WormHoles” optimizes the impulse behavior and controls the resonant character of the Cable load
  • The design minimizes the influence by the electric insulation
  • The design consists of individual insulated conductors, with a special surrounding woven material.
  • The design weaves two individual wires into one single pair of wires.
  • The are directional, which means that even internally in the speaker one end is connected to the terminals, the other end to the drivers
  • The “WormHoles” proprietary design minimizes stored energy in the cable, and diversifies it away from the signal path
  • The Benefit: Transparency, Clarity & Freedom of coloration and resonance.
  • “More music less noise”
Enclosure type: Impulse optimized Bass Reflex.
Enclosure build: Laminated and Form pressed Solid wood over multilayered Beech plywood.
Enclosure construction: Internal Bracing and pressure control segments and externally machined groves for optimized cabinet surfaces behavior.
Ground coupling: Solid MDF and rubber feet.
Internal Enclosure Acoustics: critically positioned & optimized acoustic elements.
Driver separation: By acoustic elements only
Port openings: 2 x 5 mm solid aluminum, optimized flow, anti resonance coupled to the enclosure.
Input Terminals: GamuT machined Stainless steel, Brass and Gold plated Copper terminals.
Connection Options: Minimum loss bare wire connection, 20 mm spades or 4 mm Banana, Separate connection for the tweeter and for the mid / woofer section
Internal Wiring: GamuT “ Worm Holes“ wires.
Woofer: 3 x 10,5"" dynamic optimized, solid wood reinforced and fluid rubber damped cone structure.
Midrange: 1x7" sliced cone, dynamic optimized GamuT Hand treated cone structure.
Tweeter: 1.5" impulse and resonance optimized Double ring radiator, with GamuT stainless steel wave guide.
Network: Impulse correct and resonance optimized NRLI.
Network configuration: 3 - way, DC coupled midrange, baffle-corrected for free in room placement.
Front Cover: Acoustically invisible stainless steel rods & fabric coated rubber strings, all screw assembled and adjusted by hand.
Impedance: 4 ohms nominal
Minimum impedance: 3,2 ohms at 250 Hz
Crossover point: 250 & 2250 Hz
Sensitivity: 89dB/2.83V
Frequency response: 18Hz - 60 kHz
Dimensions: 65.75"(H) 12.6" (W) 31.57" (D)
Weight: 185 Kg/408 lbs.
Recommended amplifier for maximum performance: minimum 200W into 4 ohms.
Recommended amplifier for maximum performance: maximum 900W into 4 ohms.

Call for pricing Available in Ash White,  Sipo Mahogany, Weinge
 
Aurum Cantus
 
V2M  
 
 
 
Design: 2-way vented-box
Frequency Response: 50Hz-40kHz
Sensitivity (2.83V/1m): 87dB
Impedance: 8 ohms (minimum 6.4 ohms)
Power Requirement: 50-200W recommended
Tweeter: Model:G2N. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT): 60mm×14.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
Midwoofer: Model: AC130AVM/50CK, 1×130mm (5.2"). Aluminum frame, the composite cone of Non-woven carbon fiber and Kevlar, 50mm (2") copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
Crossover Frequency: 2500Hz
Crossover’s Attenuation Slope: Woofer -6dB, Tweeter -18dB
Crossover Components: M-Cap Supreme MKP capacitors are used for the crossover of tweeter, Aurum Cantus MKP capacitors are used for the crossover of midwoofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
Connective Cable: Teflon insulated OCC cable
Damping Materials: polyester fiber and the PU foam
Binding Posts 2 pcs 18mm gold-plated copper connectors
Cabinet Material: High quality MDF
Finish: Rosewood PE high gloss paint
Dimensions: (HWD): 370mm×205mm×309mm (14.57"×8.07"×12.17")
Weight: 12.8kgs/pc (28.22lb/pc)
Gross Weight 32kgs/pair (70.55lb/pair)
Price $1890.00
 
 
V3M
 
 
Design: 2-way vented-box
Frequency Response: 45Hz-40kHz
Sensitivity (2.83V/1m): 88dB
Impedance: 8 ohms (minimum 6.4 ohms)
Power Requirement: 50-200W recommended
Tweeter: Model:G2N. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT): 60mm×14.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
Midwoofer: AC165AVM/50CK, 1×165mm (6.5"). Aluminum frame, the composite cone of Non-woven carbon fiber and Kevlar, 50mm (2") copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
Crossover Frequency: 2200Hz
Crossover’s Attenuation Slope: Woofer -12dB, Tweeter -18dB
Crossover Components: M-Cap Supreme MKP capacitors are used for the crossover of tweeter, Aurum Cantus MKP capacitors are used for the crossover of midwoofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
Connective Cable: Teflon insulated OCC cable
Damping Materials: polyester fiber and the PU foam
Binding Posts 2 pcs 18mm gold-plated copper connectors
Cabinet Material: High quality MDF
Finish: Rosewood PE high gloss paint
Dimensions: (HWD): 410mm×225mm×359mm (16.14"×8.86"×14.13")
Weight: 16kgs/pc (35.27lb/pc)
Gross Weight 50Kgs/pair (110.24lb/pair)
Price $2750.00  
 
 
V6F
 
 
Design: 2.5-way vented-box
Frequency Response: 38Hz-40kHz
Sensitivity (2.83V/1m): 88dB
Impedance: 4 ohms (minimum 3.2 ohms)
Power Requirement: 50-200W recommended
Tweeter: Model:G2N. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT): :110mm×14.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
Midwoofer: AC165AVM/50CK, 1×165mm (6.5"). Aluminum frame, the composite cone of Non-woven carbon fiber and Kevlar, 50mm (2") copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
Crossover Frequency: 2200Hz
Crossover’s Attenuation Slope: Woofer -6dB, Midwoofer -12dB, Tweeter -18dB
Crossover Components: M-Cap Supreme MKP capacitors and Jantzen MKP capacitors are used for crossover of tweeter, Aurum Cantus MKP capacitors and nonpolarity electrolytic capacitorsare used for the crossover of midwoofer and woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
Connective Cable: Teflon insulated OCC cable
Damping Materials: polyester fiber and the PU foam
Binding Posts 2 pcs 18mm gold-plated copper connectors
Cabinet Material: High quality MDF
Finish: Rosewood PE high gloss paint
Dimensions: (HWD)：1050mm×316mm×432mm (41.34″×12.44″×17″)
Weight: 39kgs/pc (86lb/pc)
Gross Weight 50Kgs/pair (110.24lb/pair)
Price $4750.00
 
 
 
V8F
 
 
Design: 3way vented-box
Frequency Response: 35Hz-40kHz
Sensitivity (2.83V/1m): 88dB
Impedance: 8 ohms (minimum 6.4 ohms)
Power Requirement: 50-250W recommended
Tweeter: Model: G1. Purified aluminum ribbon tweeter, the size of aluminum ribbon(LWT):150mm×14.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
Midrange: Model: AC165AVM/50SC, 1×165mm (6.5″). Aluminum frame, the sandwich cone of Non- woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil,120mm×20mm Y30 Ferrite magnet.
Woofer: Model: AC200AVM/75C2C, 1×200mm (8″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 75mm (3″) copper clad aluminum voice coil with flat wire，the special magnet system with Faraday ring and demodulation coil,170mm×22mm Y30 Ferrite magnet.
Crossover Frequency: 150Hz and 2100Hz
Crossover’s Attenuation Slope: Woofer -6dB, Midwoofer -12dB, Tweeter -18dB
Crossover Components: M-Cap Supreme MKP capacitors and Jantzen MKP capacitors are used for crossover of tweeter, Aurum Cantus MKP capacitors and nonpolarity electrolytic capacitorsare used for the crossover of midwoofer and woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
Connective Cable: Teflon insulated OCC cable
Damping Materials: polyester fiber and the PU foam
Binding Posts 2 pcs 18mm gold-plated copper connectors
Cabinet Material: High quality MDF
Finish: Rosewood PE high gloss paint
Dimensions: (HWD)：1100mm×352mm×462mm (43.3″×13.86″×18.19″).
Weight: 39kgs/pc (86lb/pc)
Gross Weight 53Kgs/pc (116.85lb/pc)
Price $7950.00
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
John Blue Audio Art
 
JB3
       
 
Reviews:
http://www.6moons.com/audioreviews/johnblue/jb3.html
http://www.tnt-audio.com/casse/jb3_e.html
 
JohnBlue JB3 is 3 inch full range book shelf speaker. Hi-End quality soundstage speaker in tiny size is good for office or small space using. It will also be good for PC user to set up in from of their desk as upgraded audio system
 
Characteristic
 
JB3 is the latest creation of JohnBlue Audio Art Taiwan 2007.Its diminutive trunk finished by 1mm thickness Piano-Gloss-Lacquer on strong MDF construction with a sliver proprietary damping material. The driver designed with one phase cone and whizzer which could reaching high up frequency range easily. The bass reflex design could provide some expansive soundstage both depth and width. The sound image is clean and smooth .The twin copper binding posts are in excellent quality which is made by pure solid core copper with golden plated and special antirust to avoid oxidation.

Strong MDF construction 1mm thickness Piano Gloss Lacquer.
 
 Specifications:
Wiring: All internal wiring are done with Pure Solid Core Copper by gold plated with antirust processing.
Driver: 3 inch full range driver with special resin cast waveguide, antifungus treaded paper cone designed by JohnBlue Audio Art.
Efficiency:     87dB / W / m
Impendence: 6 Ohm
Max power:30 Watt
Weight:4.2kgs / pair (Net weight)
$399.00 Great Value for the Money!
 
JB4
 
 
 
Its enclosure is crafted using 24mm thick high pressured bonded MDF. Thanks to its proprietary internal honeycomb structure, NO fibre is needed internally for damping. This allows for an extremely transparent delivery. Innovative enclosure design allows the driver to radiate sound from the enclosure edge and give it a horn effect. Each pair of JB4 is fully laminated with SOLID cherry wood veneer and hand buffed to a achieved a low sheen subtle shine.
Specs:
  • Efficiency : 89 dB / W / m
  • Impedance : 6 Ohm
  • Max power : 30W
  • Dimensions H x W x D : 305 x 200 x 270 mm
  • Weight : 15 kg/pair
$890.00
 
 
 
 
 
 
 
 
 
 

 
Copyright Kaplan DesignJeffrey Kaplan Enterprises